Modification scheme of running the amber light in new traffic regulations and how to avoid running the amber light in driving

The traffic signal light consists of red light, green light and amber light. The red light indicates no passage, the green light indicates permission, and the amber light indicates warning. When the green light is on, vehicles are allowed to pass, but turning vehicles shall not hinder the passage of straight vehicles and pedestrians. When the amber light is on, vehicles that have crossed the stop line can continue to pass, which is not regarded as running the amber light.

 

For the amber light is on when the motor vehicle decelerates through the intersection, the motor vehicle that has crossed the stop line can continue to drive, and the motor vehicle that has not crossed the stop line shall stop. However, running the amber light is a violation of the road traffic signal, the driver shall be fined not less than 20 yuan but not more than 200 yuan, and 6 points shall be deducted.

 

Identification of amber light: the driver should slow down before preparing for the amber light. Vehicles with acceleration behavior are suspected of running the amber light. If any part of the vehicle body has crossed the stop line when the amber light is on, the vehicle can continue to pass, and it is not recognized as run the amber light. If the vehicle body continues to drive without passing the stop line, it will be regarded as running the amber light.


Avoid running through the amber light when driving, and pay attention to the following aspects:

 

1. When driving to the intersection, the car must not follow too close to the car in front to ensure a certain safe distance.

2. Drivers should have a sense of safety to avoid running through the amber light. When driving to the intersection, they can slow down in advance, so that they can stop the car in time when they find that the light changes.

3. When approaching the intersection, be sure to watch the color of the traffic lights. If the car is within the range of about 10 meters from the stop line, the red lights do not change, and there are few vehicles in front, you can accelerate appropriately. There can be enough time to pass through this range, and there will be no running the amber lights.

4. When passing the intersection with time display signal lights, observe the changing time of the signal lights from a distance, and control the driving speed according to the time, so as to have enough time to brake when changing the lights, and to avoid running the red light.

5. When the traffic signal light is green, if the car is far from the stop line and there is a vehicle in front, don't accelerate. The light should change when the car reaches the stop line. In this case, it is necessary to slow down.

6. When the vehicle is driving, if the in front traffic signal light is red and a car has stopped, it can be inferred that the time for the red light to turn green will not be very long. At this time, you can slow down appropriately. Once you see the movement of the car in front, you can accelerate appropriately and drive through with the traffic flow.

7. When the car is driving, especially when it is about to reach the intersection, you must keep a good distance on the premise of driving at a low speed, so that you can have time to stop the car at the stop line even when the traffic signal light changes whereas the vehicle in front of you passes through the stop line.

8. In order to ensure safety, pay attention not only to the following distance of the front car, but also to the distance behind you. When you pass the intersection, you may brake at any time. At this time, you should observe whether the distance between the rear vehicle and yourself is safe from the rearview mirror. If the distance is too close, you can slow down and gently brake to signal the rear vehicle to slow down in advance to avoid danger.



评论

此博客中的热门博文

What is a traffic signal control system?